Replacing the door of your home is an important part of keeping it secure. You may be wondering how you can accomplish this task on your own. While it is true that a well-built home will have many different problems, replacing a door can be extremely easy. This article will go over some simple steps that you can follow to get the door replaced.


1. Remove The Existing Door

The first thing you should do is remove the old door. Cut it from the hinges and carefully take it down. Ideally, you can call a professional for help. If you have a hole in your wall from removing the previous door, you can choose to cover it with a simple door jamb to prevent drafts. This is not necessary though. It would be a good idea to replace the jamb if it is rotted or damaged.

2. Preparation

Once you have the old door down, it is time to put the new one in. The first thing you will need to do is make sure that the inside of the space where you will be placing the door is clean. You should also take some time to ensure that it is level and square. These things are important for ensuring an easier installment process. If your area is not square, you may have to shave the new door down in some areas to fit. These are also necessary for making sure that the door will fit properly.

3. Putting Markings

Once your door is clean and level, you will need to mark the edge of it. This needs to be done on both the frame and the door. You will also need to add marks to indicate where the hinges should go. These markings are important to set the exact placement of the cabinet hinges and should be made on the inside of the door. Put a mark for drilling on the top and bottom of the edge. You can view a diagram for this information at your local hardware store or online.

4. Attach The Hinges

The hinges are one of the most important parts of your door. You will need to get the hinges attached correctly to make sure your door is secure. For this part, you will need to drill holes where you will attach the hinges. Once the holes are drilled, you can attach the hinges. Use the screws that come with the new door if there are any. If not, then you will need to buy some. It would be a good idea to read the directions that come with it to ensure proper installation.

5. Attach The Door

After attaching the hinges it is time to attach the door. Make sure that you have the right side up. Which side is the correct way? The answer to this question depends on which direction you are opening your door. A good rule of thumb is to ensure that the handle and lockset are on the outside. Secure the door to the hinges and make sure they are all level. Once this is done, it should be easy to attach your knob or lockset.


Replacing a door is a relatively easy task. To start, you need to cut the old one from its hinges. This is one of the most important steps because you will need to use the space that is left for the new door. The rest of the steps are fairly simple if you follow this guide. Replacing this feature of your home can be a great way to improve its security. If you follow these steps, you will be able to replace it like a pro.

You may also like

Leave a Reply

More in Decoration