1405451721816
1405451721816

It’s cold outside, and many of you are facing problems with the heater. If your furnace is not working properly, you don’t have to call professionals immediately. Simple steps can help you deal with the furnace issues and get your system working properly. So, let’s learn these steps right away. 

Steps to Drain Off & Restart Your Furnace

1. FILL THE FUEL TANK

When you are going to fix furnace issues, be mindful of the heating oil level. Sometimes the furnace keeps working at a low oil level, and it stops producing heat. According to paylessforoil.com experts, “A well-maintained heating oil tank is important for keeping your heating system working properly.” So, when you are planning for bleeding or fixing issues, it is essential your furnace must be filled with heating oil up to the desired level.

2. HIT THE RESET BUTTON

Once you have filled oil in the furnace, it is time to hit the restart button on the furnace. Sometimes, even after refilling, the furnace will not start. It does not mean that there is a problem with the furnace. But the issue is your oil level that might not reach to restart the level. Therefore, it is good to add some more oil to the furnace and press the restart button. 

3. TURN OFF THE FURNACE

If hitting the reset button does not work, you may need to switch off the furnace and start it from the direct button. On many furnaces, the reset button helps to shut the valve off, otherwise switch off your furnace manually.    

4. COLLECT ALL THE TOOLS AND UNSCREW THE VALVE

Now, as you are preparing for bleeding off, which is not possible without adequate tools. You will need an adjustable wrench that will fit the bleeder valve and a container to collect waste. When everything is settled, it’s time to unscrew the valve. The oil will start to come out. Let it drain until solid fuel completely runs out. When you see clear oil, you can hit the reset button. The furnace will be off. Still, there are issues. It will be good to call a professional technician. 

5. TIGHTEN THE VALVE AND CHECK ITS PERFORMANCE

When everything is settled, it’s time to tighten the valve and restart the furnace. You may hear sounds like kicking the furnace, but these are common and show your project’s success. If not, you should start it again by loosening the bleeder valve. Repeating the process will give you success in the project.

BE CAREFUL AND TAKE PRECAUTIONS

Before going to begin furnace bleeding and restarting it, make sure you can follow these steps for the oil furnace only. In case you are using a gas burner, it will be better to take assistance from professionals. Otherwise, gas leakage can put your and your family’s life in danger. If you are dealing with extremely hot surface areas connected to electricity, you should focus on safety rules. 

Bottom Line

Hope the above information helps you to fix your furnace issues with DIY skills. Be careful about the oil level to eliminate the hassle. For quick assistance, you can also look for home delivery heating oil service providers. 

You may also like

Leave a Reply

More in Furniture